Seachem

Seachem Neutral Regulator adjusts pH to neutral (pH 7.0) from either a low or high pH and maintains it there. It softens water by precipitating calcium and magnesium while removing any chlorine, chloramine, or ammonia.

• Adjusts high or low pH to 7.0
• Removes chlorine, chloramines and ammonia
• Makes other conditioning unnecessary

The use of SeaChem Neutral Regulator makes other conditioning unnecessary. To lower pH below 7.0 use Neutral Regulator with Acid Regulator (or Discus Buffer). To raise pH above 7.0 use with Alkaline Regulator. All of these products will enhance and stabilize the freshwater aquarium environment.

Use Fresh Trace to restore the proper level of trace elements required by thriving, healthy freshwater community fish.

Seachem Malawi/Victoria Buffer is a blend of carbonate salts designed to enhance the natural environment of cichlids by increasing hardness and buffer capacity, and reaching and maintaining a healthy pH range of 7.8-8.4.

• Raises and maintains a pH range of 7.8 - 8.4
• Freshwater aquarium additive increases water hardness (alkalinity)
• pH conditioner/buffer for Malawi and Victoria cichlids

For optimum replication of the Malawi/Victoria environment, use with Cichlid Lake Salt and Cichlid Trace.

Directions: Use 5 g (1 level teaspoon) for each 10 to 20 gallons of water each day until desired pH is attained and maintained. Thereafter, use as required to maintain pH, usually no more than once every two to three weeks.

Tips: It is best to dissolve the buffer in freshwater before use. Use when setting up an aquarium or making water changes (preferably after the addition of Seachems Cichlid Lake Salt) and between water changes as needed to maintain pH. Seachems Malawi/Victoria Buffer is formulated to maintain a pH between 7.8 and 8.4, depending on the amount used. To attain a lower pH than 7.8, you may use Seachems Acid Buffer in combination with Malawi/Victoria Buffer. To attain a higher pH than 8.4, use Tanganyika Buffer.

Seachem Malawi/Victoria Buffer is a blend of carbonate salts designed to enhance the natural environment of cichlids by increasing hardness and buffer capacity, and reaching and maintaining a healthy pH range of 7.8-8.4.

• Raises and maintains a pH range of 7.8 - 8.4
• Freshwater aquarium additive increases water hardness (alkalinity)
• pH conditioner/buffer for Malawi and Victoria cichlids

For optimum replication of the Malawi/Victoria environment, use with Cichlid Lake Salt and Cichlid Trace.

Directions: Use 5 g (1 level teaspoon) for each 10 to 20 gallons of water each day until desired pH is attained and maintained. Thereafter, use as required to maintain pH, usually no more than once every two to three weeks.

Tips: It is best to dissolve the buffer in freshwater before use. Use when setting up an aquarium or making water changes (preferably after the addition of Seachems Cichlid Lake Salt) and between water changes as needed to maintain pH. Seachems Malawi/Victoria Buffer is formulated to maintain a pH between 7.8 and 8.4, depending on the amount used. To attain a lower pH than 7.8, you may use Seachems Acid Buffer in combination with Malawi/Victoria Buffer. To attain a higher pH than 8.4, use Tanganyika Buffer.

Seachem Malawi/Victoria Buffer is a blend of carbonate salts designed to enhance the natural environment of cichlids by increasing hardness and buffer capacity, and reaching and maintaining a healthy pH range of 7.8-8.4.

• Raises and maintains a pH range of 7.8 - 8.4
• Freshwater aquarium additive increases water hardness (alkalinity)
• pH conditioner/buffer for Malawi and Victoria cichlids

For optimum replication of the Malawi/Victoria environment, use with Cichlid Lake Salt and Cichlid Trace.

Directions: Use 5 g (1 level teaspoon) for each 10 to 20 gallons of water each day until desired pH is attained and maintained. Thereafter, use as required to maintain pH, usually no more than once every two to three weeks.

Tips: It is best to dissolve the buffer in freshwater before use. Use when setting up an aquarium or making water changes (preferably after the addition of Seachems Cichlid Lake Salt) and between water changes as needed to maintain pH. Seachems Malawi/Victoria Buffer is formulated to maintain a pH between 7.8 and 8.4, depending on the amount used. To attain a lower pH than 7.8, you may use Seachems Acid Buffer in combination with Malawi/Victoria Buffer. To attain a higher pH than 8.4, use Tanganyika Buffer.

SeaChem Discus Buffer helps to replicate the ideal Discus environment (low pH and low GH (General Hardness)). Discus Buffer will lower pH and keep it lowered. Discus Buffer also softens water by precipitating calcium and magnesium.

• Adjusts pH to 5.8 - 6.8
• Helps to replicate the ideal Discus environment
• Softens water by precipitating calcium and magnesium

Use SeaChem Discus Trace to restore the proper level of trace elements required by thriving, healthy Discus.

Directions: Use 1 level teaspoon (7 g) for every 40-80 L (10-20 gallons) daily until intended pH is reached. Thereafter, use once a month or with water changes as required to maintain pH

Seachem Acid Buffer is a non-phosphate buffer to lower pH and buffer with Alkaline Buffer. Both buffers are designed for the planted aquarium or for very hard water where phosphate buffers may pose an algae or cloudiness problem.

• Lowers aquarium pH and buffers from 6.0 to 8.0
• Converts alkalinity into CO2
• For the planted aquarium or very hard water

Seachem Acid Buffer lowers pH and buffers between 5.0 and 8.0 when used with Alkaline Buffer. As Acid Buffer lowers pH it converts carbonate alkalinity (KH) into available CO2. It may also be used to safely lower pH in marine water.

Directions: To lower pH, use 1/4 teaspoon (2g) for every 80 L (20 US gallons) daily until desired pH is reached (this dose lowers alkalinity by about 0.2 meq/L (0.6 dKH)). Larger doses may be required in very hard (KH) or alkaline waters.

Seachem Alkaline Buffer raises the pH and alkalinity (KH) of your aquarium water and holds it steady between 7.2 and 8.5 - an ideal range for most freshwater environments. Alkaline Buffer is safe, gentle, and phosphate-free to reduce the risk of algae or cloudiness.

• Raises pH and increases alkalinity
• Buffers pH between 7.2 and 8.5
• Great for planted aquariums or very hard water

Seachem Alkaline Buffer is a sodium bicarbonate-based buffer. This makes it slightly less stable than phosphate buffers, but better suited for planted aquariums where adding more phosphates would lead to an algae problem.

Dosage:
300 grams (10.5 oz): Treats 860 Gallons
600 grams (1.3 lbs): Treats 1,720 Gallons
1.2 kg (2.6 lbs): Treats 3,440 Gallons
4 kg (8.8 lbs): Treats 11,640 Gallons

Directions: To increase pH, use 1 teaspoon (7g) for every 80 L (20 gallons) daily until the desired pH is reached (this dose raises alkalinity by about 1 meq/L (2.8 dKH)). For precise dosing, use the Seachem Digital Spoon Scale. In order to adjust pH gradually, use Alkaline Buffer with Acid Buffer.

FAQ:

• Q: What is the difference between Neutral Regulator, Discus Buffer, Alkaline Buffer, and Acid Buffer
  A: Neutral Regulator and Discus Buffer are phosphate-based buffers providing a very strong and stable buffering system. Alkaline Buffer and Acid Buffer are non-phosphate buffers, which although less stable than a phosphate buffer, are ideal for the planted aquarium where high phosphate levels would lead to an algae problem.
• Q: Is Alkaline Buffer a sodium bicarbonate
  A: Yes, it is a sodium bicarbonate-based buffer.

Seachem Alkaline Buffer raises the pH and alkalinity (KH) of your aquarium water and holds it steady between 7.2 and 8.5 - an ideal range for most freshwater environments. Alkaline Buffer is safe, gentle, and phosphate-free to reduce the risk of algae or cloudiness.

• Raises pH and increases alkalinity
• Buffers pH between 7.2 and 8.5
• Great for planted aquariums or very hard water

Seachem Alkaline Buffer is a sodium bicarbonate-based buffer. This makes it slightly less stable than phosphate buffers, but better suited for planted aquariums where adding more phosphates would lead to an algae problem.

Dosage:
300 grams (10.5 oz): Treats 860 Gallons
600 grams (1.3 lbs): Treats 1,720 Gallons
1.2 kg (2.6 lbs): Treats 3,440 Gallons
4 kg (8.8 lbs): Treats 11,640 Gallons

Directions: To increase pH, use 1 teaspoon (7g) for every 80 L (20 gallons) daily until the desired pH is reached (this dose raises alkalinity by about 1 meq/L (2.8 dKH)). For precise dosing, use the Seachem Digital Spoon Scale. In order to adjust pH gradually, use Alkaline Buffer with Acid Buffer.

FAQ:

• Q: What is the difference between Neutral Regulator, Discus Buffer, Alkaline Buffer, and Acid Buffer
  A: Neutral Regulator and Discus Buffer are phosphate-based buffers providing a very strong and stable buffering system. Alkaline Buffer and Acid Buffer are non-phosphate buffers, which although less stable than a phosphate buffer, are ideal for the planted aquarium where high phosphate levels would lead to an algae problem.
• Q: Is Alkaline Buffer a sodium bicarbonate
  A: Yes, it is a sodium bicarbonate-based buffer.

Seachem Alkaline Buffer raises the pH and alkalinity (KH) of your aquarium water and holds it steady between 7.2 and 8.5 - an ideal range for most freshwater environments. Alkaline Buffer is safe, gentle, and phosphate-free to reduce the risk of algae or cloudiness.

• Raises pH and increases alkalinity
• Buffers pH between 7.2 and 8.5
• Great for planted aquariums or very hard water

Seachem Alkaline Buffer is a sodium bicarbonate-based buffer. This makes it slightly less stable than phosphate buffers, but better suited for planted aquariums where adding more phosphates would lead to an algae problem.

Dosage:
300 grams (10.5 oz): Treats 860 Gallons
600 grams (1.3 lbs): Treats 1,720 Gallons
1.2 kg (2.6 lbs): Treats 3,440 Gallons
4 kg (8.8 lbs): Treats 11,640 Gallons

Directions: To increase pH, use 1 teaspoon (7g) for every 80 L (20 gallons) daily until the desired pH is reached (this dose raises alkalinity by about 1 meq/L (2.8 dKH)). For precise dosing, use the Seachem Digital Spoon Scale. In order to adjust pH gradually, use Alkaline Buffer with Acid Buffer.

FAQ:

• Q: What is the difference between Neutral Regulator, Discus Buffer, Alkaline Buffer, and Acid Buffer
  A: Neutral Regulator and Discus Buffer are phosphate-based buffers providing a very strong and stable buffering system. Alkaline Buffer and Acid Buffer are non-phosphate buffers, which although less stable than a phosphate buffer, are ideal for the planted aquarium where high phosphate levels would lead to an algae problem.
• Q: Is Alkaline Buffer a sodium bicarbonate
  A: Yes, it is a sodium bicarbonate-based buffer.

Seachem Alkaline Buffer raises the pH and alkalinity (KH) of your aquarium water and holds it steady between 7.2 and 8.5 - an ideal range for most freshwater environments. Alkaline Buffer is safe, gentle, and phosphate-free to reduce the risk of algae or cloudiness.

• Raises pH and increases alkalinity
• Buffers pH between 7.2 and 8.5
• Great for planted aquariums or very hard water

Seachem Alkaline Buffer is a sodium bicarbonate-based buffer. This makes it slightly less stable than phosphate buffers, but better suited for planted aquariums where adding more phosphates would lead to an algae problem.

Dosage:
300 grams (10.5 oz): Treats 860 Gallons
600 grams (1.3 lbs): Treats 1,720 Gallons
1.2 kg (2.6 lbs): Treats 3,440 Gallons
4 kg (8.8 lbs): Treats 11,640 Gallons

Directions: To increase pH, use 1 teaspoon (7g) for every 80 L (20 gallons) daily until the desired pH is reached (this dose raises alkalinity by about 1 meq/L (2.8 dKH)). For precise dosing, use the Seachem Digital Spoon Scale. In order to adjust pH gradually, use Alkaline Buffer with Acid Buffer.

FAQ:

• Q: What is the difference between Neutral Regulator, Discus Buffer, Alkaline Buffer, and Acid Buffer
  A: Neutral Regulator and Discus Buffer are phosphate-based buffers providing a very strong and stable buffering system. Alkaline Buffer and Acid Buffer are non-phosphate buffers, which although less stable than a phosphate buffer, are ideal for the planted aquarium where high phosphate levels would lead to an algae problem.
• Q: Is Alkaline Buffer a sodium bicarbonate
  A: Yes, it is a sodium bicarbonate-based buffer.

Seachem live bearer/brackish aquarium salt is a chemically sound blend of salts designed to replicate the native environment of live bearers and other brackish estuary fish without adversely impacting on aquatic plants when used at regionally specific recommended dosage. The salt is also well suited for routine aquarium freshwater use. It does not impact pH or provide buffering. For low range pH control Use Acid buffer, discus buffer, South American Cichlid buffer 4. 5, or Acid regulator. Use neutral regulator, Central American Cichlid buffer or South American Cichlid buffer 7. 0 for neutral pH. For high range pH control Use alkaline regulator, alkaline buffer or Tanganyika buffer.

• A chemically sound blend of salts designed to replicate native environment of live bearers and other brackish estuary fish
• Designed to function without adversely impacting on aquatic plants when used at regionally specific recommended dosage
• Well suited for routine Aquarium freshwater dosage
• Does not impact pH or provide buffering
<

Seachem Flourish Phosphorus helps accelerate and enhance the growth of live aquarium plants, without contributing to nuisance algae growth. This simple, safe solution contains no nitrates, allowing precise phosphorus dosing to meet your plants' needs.

• Phosphorus supplement for the planted aquarium
• Safe solution (4,500 mg/L) of potassium phosphate
• Contains no nitrate and does not contribute to algae growth

Flourish Phosphorus supplies an ideal concentration (4,500 mg/L) of phosphorus, one of the three macro nutrients required for healthy plant growth (the others are nitrogen and potassium). Unlike competing products, it is nitrate-free and allows you to accurately dose your aquariums phosphate levels without the risk of overdosing nitrates. Use Flourish Phosphorus along with Flourish Nitrogen and Flourish Potassiumto achieve an ideal ratio of all three nutrients.

Directions:
Beginner: Use 2.5 mL (half a cap) for each 80 L (20 gallons) once ot twice a week or as needed in response to signs of phosphorus deficiency (such as stunted growth and/or very dark green coloring).

Expert: The beginner dose raises phosphorus by 0.05 mg/L (0.15 mg/L phosphate). The ideal phosphate level will vary, but generally ranges from 0.15-1.0 mg/L. Use a reliable test kit to monitor phosphate levels. To target a specific phosphate increase, dose according to the following formula: 0.8vp=m, where v=volume of tank in gallons, p=desired phosphate increase and m=volume of product to use (in mL). For example, to raise 20 gallons to 0.1 mg/L phosphate you would use: 0.8x20x0.1=1.6 mL.

Guaranteed Analysis:
Total Phosphate (P2O5) - 0.3%
Soluble Potash (K2O) - 0.2%

SeaChem PhosGuard rapidly removes phosphate and silicate from marine and freshwater aquaria. It is not recommended for phosphate buffered freshwater. SeaChem PhosGuard is highly porous for high capacity and bead-shaped for optimum water flow.

• Removes phosphate and silicate from fresh and saltwater systems
• Highly porous and bean-shaped for maximum absorption and water flow
• Causes a decline in hair algae and enhanced coral growth

SeaChem Phosguard outperforms all competing products. PhosGuard is a high capacity and high efficiency filtration product for removing phosphates and silicates from marine or fresh water aquaria. Unlike competing products, PhosGuard is bead-shaped for optimum flow characteristics and has an exceptional porosity for enhanced capacity. PhosGuard has a working capacity to remove 20 to 60 mg/l phosphate in 100 gallons with a similar impact on silicates. It may be used continuously or intermittently, and will not release removed phosphate. PhosGuard will cause a decline in hair algae and enhance coral growth. Each liter treats up to 300 gallons. Marine or freshwater use.

Instructions: Use 1 cup for every 75 gallons. Leave product in place for 4 days, then test phosphate and silicate.

SeaChem PhosGuard rapidly removes phosphate and silicate from marine and freshwater aquaria. It is not recommended for phosphate buffered freshwater. SeaChem PhosGuard is highly porous for high capacity and bead-shaped for optimum water flow.

• Removes phosphate and silicate from fresh and saltwater systems
• Highly porous and bean-shaped for maximum absorption and water flow
• Causes a decline in hair algae and enhanced coral growth

SeaChem Phosguard outperforms all competing products. PhosGuard is a high capacity and high efficiency filtration product for removing phosphates and silicates from marine or fresh water aquaria. Unlike competing products, PhosGuard is bead-shaped for optimum flow characteristics and has an exceptional porosity for enhanced capacity. PhosGuard has a working capacity to remove 20 to 60 mg/l phosphate in 100 gallons with a similar impact on silicates. It may be used continuously or intermittently, and will not release removed phosphate. PhosGuard will cause a decline in hair algae and enhance coral growth. Each liter treats up to 300 gallons. Marine or freshwater use.

Instructions: Use 1 cup for every 75 gallons. Leave product in place for 4 days, then test phosphate and silicate.

SeaChem PhosGuard rapidly removes phosphate and silicate from marine and freshwater aquaria. It is not recommended for phosphate buffered freshwater. SeaChem PhosGuard is highly porous for high capacity and bead-shaped for optimum water flow.

• Removes phosphate and silicate from fresh and saltwater systems
• Highly porous and bean-shaped for maximum absorption and water flow
• Causes a decline in hair algae and enhanced coral growth

SeaChem Phosguard outperforms all competing products. PhosGuard is a high capacity and high efficiency filtration product for removing phosphates and silicates from marine or fresh water aquaria. Unlike competing products, PhosGuard is bead-shaped for optimum flow characteristics and has an exceptional porosity for enhanced capacity. PhosGuard has a working capacity to remove 20 to 60 mg/l phosphate in 100 gallons with a similar impact on silicates. It may be used continuously or intermittently, and will not release removed phosphate. PhosGuard will cause a decline in hair algae and enhance coral growth. Each liter treats up to 300 gallons. Marine or freshwater use.

Instructions: Use 1 cup for every 75 gallons. Leave product in place for 4 days, then test phosphate and silicate.

SeaChem PhosGuard rapidly removes phosphate and silicate from marine and freshwater aquaria. It is not recommended for phosphate buffered freshwater. SeaChem PhosGuard is highly porous for high capacity and bead-shaped for optimum water flow.

• Removes phosphate and silicate from fresh and saltwater systems
• Highly porous and bean-shaped for maximum absorption and water flow
• Causes a decline in hair algae and enhanced coral growth

SeaChem Phosguard outperforms all competing products. PhosGuard is a high capacity and high efficiency filtration product for removing phosphates and silicates from marine or fresh water aquaria. Unlike competing products, PhosGuard is bead-shaped for optimum flow characteristics and has an exceptional porosity for enhanced capacity. PhosGuard has a working capacity to remove 20 to 60 mg/l phosphate in 100 gallons with a similar impact on silicates. It may be used continuously or intermittently, and will not release removed phosphate. PhosGuard will cause a decline in hair algae and enhance coral growth. Each liter treats up to 300 gallons. Marine or freshwater use.

Instructions: Use 1 cup for every 75 gallons. Leave product in place for 4 days, then test phosphate and silicate.

SeaChem PhosGuard rapidly removes phosphate and silicate from marine and freshwater aquaria. It is not recommended for phosphate buffered freshwater. SeaChem PhosGuard is highly porous for high capacity and bead-shaped for optimum water flow.

• Removes phosphate and silicate from fresh and saltwater systems
• Highly porous and bean-shaped for maximum absorption and water flow
• Causes a decline in hair algae and enhanced coral growth

SeaChem Phosguard outperforms all competing products. PhosGuard is a high capacity and high efficiency filtration product for removing phosphates and silicates from marine or fresh water aquaria. Unlike competing products, PhosGuard is bead-shaped for optimum flow characteristics and has an exceptional porosity for enhanced capacity. PhosGuard has a working capacity to remove 20 to 60 mg/l phosphate in 100 gallons with a similar impact on silicates. It may be used continuously or intermittently, and will not release removed phosphate. PhosGuard will cause a decline in hair algae and enhance coral growth. Each liter treats up to 300 gallons. Marine or freshwater use.

Instructions: Use 1 cup for every 75 gallons. Leave product in place for 4 days, then test phosphate and silicate.

Seachem Garlic Guard is an appetite and flavor enhancer for freshwater and saltwater fish. Garlic Guard contains allicin (the naturally derived, active ingredient found in garlic), which has been demonstrated to possess health-promoting benefits, and will help renew the interest of poor or finicky eaters.

• Garlic additive and flavor enhancer
• Renews interest of poor or finicky eaters
• Suitable for fresh or saltwater; reef and plant safe

Allicin possesses strong antioxidant properties (similar to Vitamin C) which promote enhanced health through elimination of free radicals. For enhanced health benefits, Seachem Garlic Guard also contains Vitamin C. Safe for freshwater, marine and reef aquariums.

Directions for Use: Shake well before use. Soak food in Garlic Guard before feeding.

Guaranteed Analysis:
Garlic Extract - 9900 ppm
Allicin (active ingredient) - 130 ppm
Vitamin C - 1000 ppm

Seachem Garlic Guard is an appetite and flavor enhancer for freshwater and saltwater fish. Garlic Guard contains allicin (the naturally derived, active ingredient found in garlic), which has been demonstrated to possess health-promoting benefits, and will help renew the interest of poor or finicky eaters.

• Garlic additive and flavor enhancer
• Renews interest of poor or finicky eaters
• Suitable for fresh or saltwater; reef and plant safe

Allicin possesses strong antioxidant properties (similar to Vitamin C) which promote enhanced health through elimination of free radicals. For enhanced health benefits, Seachem Garlic Guard also contains Vitamin C. Safe for freshwater, marine and reef aquariums.

Directions for Use: Shake well before use. Soak food in Garlic Guard before feeding.

Guaranteed Analysis:
Garlic Extract - 9900 ppm
Allicin (active ingredient) - 130 ppm
Vitamin C - 1000 ppm

Seachem Garlic Guard is an appetite and flavor enhancer for freshwater and saltwater fish. Garlic Guard contains allicin (the naturally derived, active ingredient found in garlic), which has been demonstrated to possess health-promoting benefits, and will help renew the interest of poor or finicky eaters.

• Garlic additive and flavor enhancer
• Renews interest of poor or finicky eaters
• Suitable for fresh or saltwater; reef and plant safe

Allicin possesses strong antioxidant properties (similar to Vitamin C) which promote enhanced health through elimination of free radicals. For enhanced health benefits, Seachem Garlic Guard also contains Vitamin C. Safe for freshwater, marine and reef aquariums.

Directions for Use: Shake well before use. Soak food in Garlic Guard before feeding.

Guaranteed Analysis:
Garlic Extract - 9900 ppm
Allicin (active ingredient) - 130 ppm
Vitamin C - 1000 ppm

Seachem Purigen Ultimate Filtration is a premium synthetic adsorbent that, unlike any other filtration product, is not a mixture of ion exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from water at a rate and capacity that exceeds all others by over 500%.

• Removes soluble and insoluble impurities from water
• Controls ammonia, nitrites, nitrates
• Polishes water to unparalleled clarity

Purigen controls ammonia, nitrites and nitrates by removing nitrogenous organic waste that would otherwise release these harmful compounds. Purigens impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Purigen darkens progressively as it exhausts, and is easily renewed by treating with bleach. Purigen is designed for both marine and freshwater use.

Why Its Different:

• Selectivity: Purigen is the highest capacity organic filtration resin on the market. No other products can compare to its ability to clear haziness and polish water to unparalleled clarity. Unlike other products on the market which are simple ion-exchange resins, Purigen is specifically designed to be an organic scavenging resin. When ion-exchange resins are filled to capacity by metals and other contaminants, Purigen has barely begun to reach its potential. Purigen generally ignores simple elemental compounds, having an extreme affinity for nitrogenous organics. The primary source of nitrogenous compounds in an aquarium is waste. Fish, corals, even plants produce nitrogenous waste. Purigen removes that waste faster and more completely than anything else on the market.
• Capacity: Purigens possesses enhanced capacity owing to its vast surface area. All other resins on the market are purely spherical extruded beads. These beads remain smooth even under a microscope. Purigen is both spherical and macroreticular. It has microscopic pores that increase its usable surface area to many times that of a purely spherical resin.
• Regeneration: Purigen can also be regenerated. As it adsorbs waste products, Purigen will change color from a pale blonde to a dark brown, almost black. Once it is exhausted, it can be regenerated with a solution of bleach and water. The bleach will literally “burn off" the organics that have been removed from the tank. Watch out for products that claim to be regenerable with a brine solution. That is the regeneration procedure for ion-exchange purposes. A brine solution will not remove organics. While such resins have a limited capacity for organic adsorption, a brine regeneration process only replaces removed ionic compounds. It does not destroy large organic molecules that were removed, which is the primary function of organic adsorption resins.

Directions:
Rinse before use. Use in a fine mesh filter bag. Each 1 L treats up to 4,000 L (1,000 gallons) for up to six months. Exhaustion is indicated by a pronounced discoloration of the beads to dark brown or black.

Regeneration: Soak in a 1:1 bleach:water solution for 24 hours in a non-metalic container in a well ventilated area and away from children. Rinse well, then soak for 8 hours with a solution containing 2 tablespoons of ChlorGuard, Prime, or equivalent dechlorinator per cup of water. Rinse well. Original color and full activity should now be restored and Purigen is ready for reuse. Caution: some slime coat products may permanently foul Purigen and render regeneration difficult. Do not reuse if odor of chlorine is detectable. In case of doubt, soak beads in small quantity of water and test for residual chlorine with a chlorine test kit.

Dosage:
100 ml (Media Bag): Treats 106 Gallons
250 ml: Treats 265 Gallons
500 ml: Treats 530 Gallons
1 Liter: Treats 1,060 Gallons
2 Liters: Treats 2,120 Gallons

Seachem Purigen Ultimate Filtration is a premium synthetic adsorbent that, unlike any other filtration product, is not a mixture of ion exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from water at a rate and capacity that exceeds all others by over 500%.

• Removes soluble and insoluble impurities from water
• Controls ammonia, nitrites, nitrates
• Polishes water to unparalleled clarity

Purigen controls ammonia, nitrites and nitrates by removing nitrogenous organic waste that would otherwise release these harmful compounds. Purigens impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Purigen darkens progressively as it exhausts, and is easily renewed by treating with bleach. Purigen is designed for both marine and freshwater use.

Why Its Different:

• Selectivity: Purigen is the highest capacity organic filtration resin on the market. No other products can compare to its ability to clear haziness and polish water to unparalleled clarity. Unlike other products on the market which are simple ion-exchange resins, Purigen is specifically designed to be an organic scavenging resin. When ion-exchange resins are filled to capacity by metals and other contaminants, Purigen has barely begun to reach its potential. Purigen generally ignores simple elemental compounds, having an extreme affinity for nitrogenous organics. The primary source of nitrogenous compounds in an aquarium is waste. Fish, corals, even plants produce nitrogenous waste. Purigen removes that waste faster and more completely than anything else on the market.
• Capacity: Purigens possesses enhanced capacity owing to its vast surface area. All other resins on the market are purely spherical extruded beads. These beads remain smooth even under a microscope. Purigen is both spherical and macroreticular. It has microscopic pores that increase its usable surface area to many times that of a purely spherical resin.
• Regeneration: Purigen can also be regenerated. As it adsorbs waste products, Purigen will change color from a pale blonde to a dark brown, almost black. Once it is exhausted, it can be regenerated with a solution of bleach and water. The bleach will literally “burn off" the organics that have been removed from the tank. Watch out for products that claim to be regenerable with a brine solution. That is the regeneration procedure for ion-exchange purposes. A brine solution will not remove organics. While such resins have a limited capacity for organic adsorption, a brine regeneration process only replaces removed ionic compounds. It does not destroy large organic molecules that were removed, which is the primary function of organic adsorption resins.

Directions:
Rinse before use. Use in a fine mesh filter bag. Each 1 L treats up to 4,000 L (1,000 gallons) for up to six months. Exhaustion is indicated by a pronounced discoloration of the beads to dark brown or black.

Regeneration: Soak in a 1:1 bleach:water solution for 24 hours in a non-metalic container in a well ventilated area and away from children. Rinse well, then soak for 8 hours with a solution containing 2 tablespoons of ChlorGuard, Prime, or equivalent dechlorinator per cup of water. Rinse well. Original color and full activity should now be restored and Purigen is ready for reuse. Caution: some slime coat products may permanently foul Purigen and render regeneration difficult. Do not reuse if odor of chlorine is detectable. In case of doubt, soak beads in small quantity of water and test for residual chlorine with a chlorine test kit.

Dosage:
100 ml (Media Bag): Treats 106 Gallons
250 ml: Treats 265 Gallons
500 ml: Treats 530 Gallons
1 Liter: Treats 1,060 Gallons
2 Liters: Treats 2,120 Gallons

Seachem Purigen Ultimate Filtration is a premium synthetic adsorbent that, unlike any other filtration product, is not a mixture of ion exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from water at a rate and capacity that exceeds all others by over 500%.

• Removes soluble and insoluble impurities from water
• Controls ammonia, nitrites, nitrates
• Polishes water to unparalleled clarity

Purigen controls ammonia, nitrites and nitrates by removing nitrogenous organic waste that would otherwise release these harmful compounds. Purigens impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Purigen darkens progressively as it exhausts, and is easily renewed by treating with bleach. Purigen is designed for both marine and freshwater use.

Why Its Different:

• Selectivity: Purigen is the highest capacity organic filtration resin on the market. No other products can compare to its ability to clear haziness and polish water to unparalleled clarity. Unlike other products on the market which are simple ion-exchange resins, Purigen is specifically designed to be an organic scavenging resin. When ion-exchange resins are filled to capacity by metals and other contaminants, Purigen has barely begun to reach its potential. Purigen generally ignores simple elemental compounds, having an extreme affinity for nitrogenous organics. The primary source of nitrogenous compounds in an aquarium is waste. Fish, corals, even plants produce nitrogenous waste. Purigen removes that waste faster and more completely than anything else on the market.
• Capacity: Purigens possesses enhanced capacity owing to its vast surface area. All other resins on the market are purely spherical extruded beads. These beads remain smooth even under a microscope. Purigen is both spherical and macroreticular. It has microscopic pores that increase its usable surface area to many times that of a purely spherical resin.
• Regeneration: Purigen can also be regenerated. As it adsorbs waste products, Purigen will change color from a pale blonde to a dark brown, almost black. Once it is exhausted, it can be regenerated with a solution of bleach and water. The bleach will literally “burn off" the organics that have been removed from the tank. Watch out for products that claim to be regenerable with a brine solution. That is the regeneration procedure for ion-exchange purposes. A brine solution will not remove organics. While such resins have a limited capacity for organic adsorption, a brine regeneration process only replaces removed ionic compounds. It does not destroy large organic molecules that were removed, which is the primary function of organic adsorption resins.

Directions:
Rinse before use. Use in a fine mesh filter bag. Each 1 L treats up to 4,000 L (1,000 gallons) for up to six months. Exhaustion is indicated by a pronounced discoloration of the beads to dark brown or black.

Regeneration: Soak in a 1:1 bleach:water solution for 24 hours in a non-metalic container in a well ventilated area and away from children. Rinse well, then soak for 8 hours with a solution containing 2 tablespoons of ChlorGuard, Prime, or equivalent dechlorinator per cup of water. Rinse well. Original color and full activity should now be restored and Purigen is ready for reuse. Caution: some slime coat products may permanently foul Purigen and render regeneration difficult. Do not reuse if odor of chlorine is detectable. In case of doubt, soak beads in small quantity of water and test for residual chlorine with a chlorine test kit.

Dosage:
100 ml (Media Bag): Treats 106 Gallons
250 ml: Treats 265 Gallons
500 ml: Treats 530 Gallons
1 Liter: Treats 1,060 Gallons
2 Liters: Treats 2,120 Gallons

Seachem Purigen Ultimate Filtration is a premium synthetic adsorbent that, unlike any other filtration product, is not a mixture of ion exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from water at a rate and capacity that exceeds all others by over 500%.

• Removes soluble and insoluble impurities from water
• Controls ammonia, nitrites, nitrates
• Polishes water to unparalleled clarity

Purigen controls ammonia, nitrites and nitrates by removing nitrogenous organic waste that would otherwise release these harmful compounds. Purigens impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Purigen darkens progressively as it exhausts, and is easily renewed by treating with bleach. Purigen is designed for both marine and freshwater use.

Why Its Different:

• Selectivity: Purigen is the highest capacity organic filtration resin on the market. No other products can compare to its ability to clear haziness and polish water to unparalleled clarity. Unlike other products on the market which are simple ion-exchange resins, Purigen is specifically designed to be an organic scavenging resin. When ion-exchange resins are filled to capacity by metals and other contaminants, Purigen has barely begun to reach its potential. Purigen generally ignores simple elemental compounds, having an extreme affinity for nitrogenous organics. The primary source of nitrogenous compounds in an aquarium is waste. Fish, corals, even plants produce nitrogenous waste. Purigen removes that waste faster and more completely than anything else on the market.
• Capacity: Purigens possesses enhanced capacity owing to its vast surface area. All other resins on the market are purely spherical extruded beads. These beads remain smooth even under a microscope. Purigen is both spherical and macroreticular. It has microscopic pores that increase its usable surface area to many times that of a purely spherical resin.
• Regeneration: Purigen can also be regenerated. As it adsorbs waste products, Purigen will change color from a pale blonde to a dark brown, almost black. Once it is exhausted, it can be regenerated with a solution of bleach and water. The bleach will literally “burn off" the organics that have been removed from the tank. Watch out for products that claim to be regenerable with a brine solution. That is the regeneration procedure for ion-exchange purposes. A brine solution will not remove organics. While such resins have a limited capacity for organic adsorption, a brine regeneration process only replaces removed ionic compounds. It does not destroy large organic molecules that were removed, which is the primary function of organic adsorption resins.

Directions:
Rinse before use. Use in a fine mesh filter bag. Each 1 L treats up to 4,000 L (1,000 gallons) for up to six months. Exhaustion is indicated by a pronounced discoloration of the beads to dark brown or black.

Regeneration: Soak in a 1:1 bleach:water solution for 24 hours in a non-metalic container in a well ventilated area and away from children. Rinse well, then soak for 8 hours with a solution containing 2 tablespoons of ChlorGuard, Prime, or equivalent dechlorinator per cup of water. Rinse well. Original color and full activity should now be restored and Purigen is ready for reuse. Caution: some slime coat products may permanently foul Purigen and render regeneration difficult. Do not reuse if odor of chlorine is detectable. In case of doubt, soak beads in small quantity of water and test for residual chlorine with a chlorine test kit.

Dosage:
100 ml (Media Bag): Treats 106 Gallons
250 ml: Treats 265 Gallons
500 ml: Treats 530 Gallons
1 Liter: Treats 1,060 Gallons
2 Liters: Treats 2,120 Gallons

Seachem Filter Socks remove suspended particulates from the water column down to 100 microns, providing exceptional purity and water quality. These socks are built to last, with durable welded seams and a singed finish to reduce wear and prevent the reintroduction of debris to your aquarium.

• Unparalleled particulate removal for outstanding water quality
• Durable welded seams reduces wear
• 100 micron rating traps even the smallest debris
• Plastic collar fits standard sump fittings for easy installation

100 Micron Rating. One micron is on millionth of a meter (or one thousandth of a millimeter). These socks have a mesh size of 100 microns, allowing them to trap even the smallest particles and debris.

Easy Installation and Maintenance. Rinse before use. Fit Seachem Filter Sock into any standard sump or overflow system made for collared filter socks. Remove as necessary for cleaning. Under normal use, cleaning can be accomplished by simply rinsing with a high-pressure hose. For more aggressive cleaning, soak in 1:10 solution of bleach and water for 24 hours and then rinse thoroughly with a high-pressure hose. It can also be cleaned in a standard clothes washing machine; wash on a moderate setting with a cup of bleach added to the wash cycle. Once the normal rinse cycle is complete, Seachem Filter Sock is ready for use.

Sizing:
Small: 10 x 30 cm / 4" x 12" (10 cm / 4' plastic collar)
Large: 17.5 x 40.5 cm / 7" x 16" (17.5 cm / 7" plastic collar)

Seachem Filter Socks remove suspended particulates from the water column down to 100 microns, providing exceptional purity and water quality. These socks are built to last, with durable welded seams and a singed finish to reduce wear and prevent the reintroduction of debris to your aquarium.

• Unparalleled particulate removal for outstanding water quality
• Durable welded seams reduces wear
• 100 micron rating traps even the smallest debris
• Plastic collar fits standard sump fittings for easy installation

100 Micron Rating. One micron is on millionth of a meter (or one thousandth of a millimeter). These socks have a mesh size of 100 microns, allowing them to trap even the smallest particles and debris.

Easy Installation and Maintenance. Rinse before use. Fit Seachem Filter Sock into any standard sump or overflow system made for collared filter socks. Remove as necessary for cleaning. Under normal use, cleaning can be accomplished by simply rinsing with a high-pressure hose. For more aggressive cleaning, soak in 1:10 solution of bleach and water for 24 hours and then rinse thoroughly with a high-pressure hose. It can also be cleaned in a standard clothes washing machine; wash on a moderate setting with a cup of bleach added to the wash cycle. Once the normal rinse cycle is complete, Seachem Filter Sock is ready for use.

Sizing:
Small: 10 x 30 cm / 4" x 12" (10 cm / 4' plastic collar)
Large: 17.5 x 40.5 cm / 7" x 16" (17.5 cm / 7" plastic collar)

Seachem Zip Bags are secure filter bags that feature durable seams and a corrosive-proof zipper.

• Easily Holds 1 Liter of Filter Media
• Durable Seams
• Corrosion-Proof Zipper
• No Strings or Ties
• 12.5" x 5.5" Ideal for Resins & Small Filter Media

Seachem Zip Bags are secure filter bags that feature durable seams and a corrosive-proof zipper.

• Easily Holds 1 Liter of Filter Media
• Durable Seams
• Corrosion-Proof Zipper
• No Strings or Ties
• 12.5" x 5.5" Ideal for Intermediate Sized Filter Media