Seachem

Seachem live bearer/brackish aquarium salt is a chemically sound blend of salts designed to replicate the native environment of live bearers and other brackish estuary fish without adversely impacting on aquatic plants when used at regionally specific recommended dosage. The salt is also well suited for routine aquarium freshwater use. It does not impact pH or provide buffering. For low range pH control Use Acid buffer, discus buffer, South American Cichlid buffer 4. 5, or Acid regulator. Use neutral regulator, Central American Cichlid buffer or South American Cichlid buffer 7. 0 for neutral pH. For high range pH control Use alkaline regulator, alkaline buffer or Tanganyika buffer.

• A chemically sound blend of salts designed to replicate native environment of live bearers and other brackish estuary fish
• Designed to function without adversely impacting on aquatic plants when used at regionally specific recommended dosage
• Well suited for routine Aquarium freshwater dosage
• Does not impact pH or provide buffering
<

Seachem Flourish Phosphorus helps accelerate and enhance the growth of live aquarium plants, without contributing to nuisance algae growth. This simple, safe solution contains no nitrates, allowing precise phosphorus dosing to meet your plants' needs.

• Phosphorus supplement for the planted aquarium
• Safe solution (4,500 mg/L) of potassium phosphate
• Contains no nitrate and does not contribute to algae growth

Flourish Phosphorus supplies an ideal concentration (4,500 mg/L) of phosphorus, one of the three macro nutrients required for healthy plant growth (the others are nitrogen and potassium). Unlike competing products, it is nitrate-free and allows you to accurately dose your aquariums phosphate levels without the risk of overdosing nitrates. Use Flourish Phosphorus along with Flourish Nitrogen and Flourish Potassiumto achieve an ideal ratio of all three nutrients.

Directions:
Beginner: Use 2.5 mL (half a cap) for each 80 L (20 gallons) once ot twice a week or as needed in response to signs of phosphorus deficiency (such as stunted growth and/or very dark green coloring).

Expert: The beginner dose raises phosphorus by 0.05 mg/L (0.15 mg/L phosphate). The ideal phosphate level will vary, but generally ranges from 0.15-1.0 mg/L. Use a reliable test kit to monitor phosphate levels. To target a specific phosphate increase, dose according to the following formula: 0.8vp=m, where v=volume of tank in gallons, p=desired phosphate increase and m=volume of product to use (in mL). For example, to raise 20 gallons to 0.1 mg/L phosphate you would use: 0.8x20x0.1=1.6 mL.

Guaranteed Analysis:
Total Phosphate (P2O5) - 0.3%
Soluble Potash (K2O) - 0.2%

SeaChem PhosGuard rapidly removes phosphate and silicate from marine and freshwater aquaria. It is not recommended for phosphate buffered freshwater. SeaChem PhosGuard is highly porous for high capacity and bead-shaped for optimum water flow.

• Removes phosphate and silicate from fresh and saltwater systems
• Highly porous and bean-shaped for maximum absorption and water flow
• Causes a decline in hair algae and enhanced coral growth

SeaChem Phosguard outperforms all competing products. PhosGuard is a high capacity and high efficiency filtration product for removing phosphates and silicates from marine or fresh water aquaria. Unlike competing products, PhosGuard is bead-shaped for optimum flow characteristics and has an exceptional porosity for enhanced capacity. PhosGuard has a working capacity to remove 20 to 60 mg/l phosphate in 100 gallons with a similar impact on silicates. It may be used continuously or intermittently, and will not release removed phosphate. PhosGuard will cause a decline in hair algae and enhance coral growth. Each liter treats up to 300 gallons. Marine or freshwater use.

Instructions: Use 1 cup for every 75 gallons. Leave product in place for 4 days, then test phosphate and silicate.

SeaChem PhosGuard rapidly removes phosphate and silicate from marine and freshwater aquaria. It is not recommended for phosphate buffered freshwater. SeaChem PhosGuard is highly porous for high capacity and bead-shaped for optimum water flow.

• Removes phosphate and silicate from fresh and saltwater systems
• Highly porous and bean-shaped for maximum absorption and water flow
• Causes a decline in hair algae and enhanced coral growth

SeaChem Phosguard outperforms all competing products. PhosGuard is a high capacity and high efficiency filtration product for removing phosphates and silicates from marine or fresh water aquaria. Unlike competing products, PhosGuard is bead-shaped for optimum flow characteristics and has an exceptional porosity for enhanced capacity. PhosGuard has a working capacity to remove 20 to 60 mg/l phosphate in 100 gallons with a similar impact on silicates. It may be used continuously or intermittently, and will not release removed phosphate. PhosGuard will cause a decline in hair algae and enhance coral growth. Each liter treats up to 300 gallons. Marine or freshwater use.

Instructions: Use 1 cup for every 75 gallons. Leave product in place for 4 days, then test phosphate and silicate.

SeaChem PhosGuard rapidly removes phosphate and silicate from marine and freshwater aquaria. It is not recommended for phosphate buffered freshwater. SeaChem PhosGuard is highly porous for high capacity and bead-shaped for optimum water flow.

• Removes phosphate and silicate from fresh and saltwater systems
• Highly porous and bean-shaped for maximum absorption and water flow
• Causes a decline in hair algae and enhanced coral growth

SeaChem Phosguard outperforms all competing products. PhosGuard is a high capacity and high efficiency filtration product for removing phosphates and silicates from marine or fresh water aquaria. Unlike competing products, PhosGuard is bead-shaped for optimum flow characteristics and has an exceptional porosity for enhanced capacity. PhosGuard has a working capacity to remove 20 to 60 mg/l phosphate in 100 gallons with a similar impact on silicates. It may be used continuously or intermittently, and will not release removed phosphate. PhosGuard will cause a decline in hair algae and enhance coral growth. Each liter treats up to 300 gallons. Marine or freshwater use.

Instructions: Use 1 cup for every 75 gallons. Leave product in place for 4 days, then test phosphate and silicate.

SeaChem De-Nitrate removes nitrates, nitrites, ammonia, and organics from both freshwater and marine aquariums. The high porosity of De-Nitrate supports the proliferation of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts.

• Removes nitrates, nitrites, ammonia and organics
• Supports growth of beneficial bacteria that eliminate toxins
• Suitable for fresh and saltwater tanks

Even when exhausted as an organic adsorbent, SeaChem De-Nitrate continues to be an excellent support for the biological filter and does not have to be removed.

Directions: Place De-Nitrate to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once De-Nitrate has been used for several days, nitrate concentrations should start to fall and level off gradually at a concentration of 4-5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of De-Nitrate treats about 100-200 L (25-50 gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.

Seachem Ammonia Alert is an innovative color device for continuously detecting and monitoring free ammonia in aquariums. A sensor changes from yellow to green to blue, relative to the ammonia concentration in the water. Seachem Ammonia Alert detects less than 0.05 mg/L (ppm) free ammonia and alerts you before fish show any signs of stress. It lasts over a year and replacement sensors are available.

• Easy visual gauge to monitor ammonia in your reef or fish tank
• Use in saltwater or freshwater aquariums
• Provides 1 year of ammonia detection

In the absence of free ammonia the unit will assume a yellow or faint yellow-green color. It is normal for the dry sensor to have a greenish hue. It may take up to a few days for a dry sensor to equilibrate with the water. No sampling of water or test procedures are required. The presence of the free ammonia is detectable continuously with a response time of about 15 minutes. Response to decreasing ammonia is slower, requiring about 4 hours to register a SAFE reading.

Seachem One Year Combo Alert uses Seachem water sensor technology to continuously monitor ammonia and freshwater pH in your aquarium for an entire year, no tests or strips required. All you have to do is hang it in your tank!

• Continuous freshwater pH and ammonia readings
• No strips, no tests, just constant readings
• Easy monitoring - just hang in your tank

Ammonia Alert: The sensor automatically detects free ammonia at levels less than 0.05 mg/L (ppm) and alerts you to the presence of the primary killer of fish before it reaches hazardous levels and causes signs of stress. In the absence of free ammonia the sensor will assume a yellow color, and will move to green and blue as more ammonia is detected. Ammonia is detected continuously with a response time of just 15 minutes, allowing you to respond immediately and avoid further increases. Ammonia Alert lasts over 9 times as long as competing products, and is only about half the size.

pH Alert: pH is constantly monitored, with a sensor that alerts you to shifts in pH levels between 5.4 and 8.0 (freshwater only). It lasts up to 4 times as long as competing products and is small, clear, and unobtrusive when in the tank.

Seachem pH Alert Reader is a unique color device designed to be placed in the aquarium or filter and monitor pH continuously. A sensor changes color reversibly to alert you shifts to in pH levels between 5.8 and 8.5.

• No strips, no tests, just constant readings
• Detects pH shifts anytime for 3-6 months
• Small and unobtrusive
• For freshwater use only

DIRECTIONS: Simply place Sea Chem pH Alert Reader visibly anywhere in the aquarium or filter. Its that easy. No chemicals or test procedures are required. When first put in service, response time will be about 30 minutes. Thereafter, pH shifts will register within ten minutes. The life of the pH Alert Reader sensor may vary depending on a variety of tank parameters. A replacement sensor is included to ensure effectiveness for 3 to 6 months. Sensor exhaustion is indicated by a visible fading or washing out of sensor color.

Seachem NeoPlex Broad Spectrum Antibiotic is effective against most external infections. When used as directed NeoPlex will not discolor the water or damage the filter bed and is well tolerated by most invertebrates. Neoplex is safe for both marine and freshwater fish.

• Treats external fungal and bacterial disease
• For marine & freshwater
• Will not discolor water

Matrix carbon is a truly unique Activated carbon. It is formed as a spherical bead for optimum hydrodynamics, and will not pack. It permits maximum water flow and contact with its high density of microporous binding sites. Matrix carbon has a very low ash content as indicated by its minimal impact on ph. Even when added to distilled water, it does not raise pH above 7.0. While all carbons contain phosphate, regardless of false claims to the contrary, matrix carbon has the Lowest detectable leachable phosphate content of all major carbon brands tested. Matrix carbon outperforms other high grade carbons by at least two-fold when compared for total capacity to remove aquarium organic matter, rate of adsorption, and duration of use.

• No Binding or packing
• Will not raise pH over 7.0
• High performance

Seachem Matrix Bio Media is a highly porous media designed to provide exceptionally efficient biofiltration for single site removal of ammonia, nitrite, and nitrate from freshwater, marine, and reef aquaria.

• Premium natural bio-filter support media
• Removes ammonia, nitrite and nitrate from fresh, salt and reef tanks
• 1 liter is equivalent to over 40 L of typical plastic ball media

Each liter of Matrix provides over 160,000 cm2 (170 sq. ft.) of surface, equivalent to over 40 L (10 gallons) of typical plastic ball media! This product is sold by volume. Cited weight is minimal weight.

Directions: Use 500 mL of Matrix for each 200 L (50 gallons) of water. Matrix may be placed in any kind of filter, and is particularly effective in a canister filter. Matrix is sufficiently large that no filter bag should be required for most applications. Matrix works well in drip tray systems, but you may find that the larger Pond Matrix is better suited for such applications.

Seachem Matrix Bio Media is a highly porous media designed to provide exceptionally efficient biofiltration for single site removal of ammonia, nitrite, and nitrate from freshwater, marine, and reef aquaria.

• Premium natural bio-filter support media
• Removes ammonia, nitrite and nitrate from fresh, salt and reef tanks
• 1 liter is equivalent to over 40 L of typical plastic ball media

Each liter of Matrix provides over 160,000 cm2 (170 sq. ft.) of surface, equivalent to over 40 L (10 gallons) of typical plastic ball media! This product is sold by volume. Cited weight is minimal weight.

Directions: Use 500 mL of Matrix for each 200 L (50 gallons) of water. Matrix may be placed in any kind of filter, and is particularly effective in a canister filter. Matrix is sufficiently large that no filter bag should be required for most applications. Matrix works well in drip tray systems, but you may find that the larger Pond Matrix is better suited for such applications.

Seachem Matrix Bio Media is a highly porous media designed to provide exceptionally efficient biofiltration for single site removal of ammonia, nitrite, and nitrate from freshwater, marine, and reef aquaria.

• Premium natural bio-filter support media
• Removes ammonia, nitrite and nitrate from fresh, salt and reef tanks
• 1 liter is equivalent to over 40 L of typical plastic ball media

Each liter of Matrix provides over 160,000 cm2 (170 sq. ft.) of surface, equivalent to over 40 L (10 gallons) of typical plastic ball media! This product is sold by volume. Cited weight is minimal weight.

Directions: Use 500 mL of Matrix for each 200 L (50 gallons) of water. Matrix may be placed in any kind of filter, and is particularly effective in a canister filter. Matrix is sufficiently large that no filter bag should be required for most applications. Matrix works well in drip tray systems, but you may find that the larger Pond Matrix is better suited for such applications.

Seachem Stability quickly stabilizes new aquarium environments and establishes the bio-filter for rapid, safe startup. Its unique blend of aerobic, anaerobic and facultative bacteria break down organic waste and toxic ammonia, nitrate and nitrite to prevent "new tank syndrome," the #1 cause of fish death.

• New tank stabilization system for marine and freshwater
• Rapidly and safely establishes bio-filter
• Prevents fish death from "new tank syndrome"

Unlike competing products, the bacteria employed by Stability are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability is completely harmless to all aquatic organisms (including aquatic plants) so there is no danger of overuse. The result of nearly a decade of research and development, Seachem Stability represents the current state of the art in natural biological management.

Directions: Use 1 capful (5 mL) for each 40 L (10 gallons) on the first day with a new aquarium. After that use 1 capful for each 80 L (20 gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days. For optimum bio-filter performance use 1 capful for each 40 L (10 gallons) once a month or with each water change, whenever introducing new fish, or whenever medicating an aquarium.

Tip: Use along with Seachem Prime when setting up a new tank to create an ideal safe environment for your fish.

Seachem Stability quickly stabilizes new aquarium environments and establishes the bio-filter for rapid, safe startup. Its unique blend of aerobic, anaerobic and facultative bacteria break down organic waste and toxic ammonia, nitrate and nitrite to prevent "new tank syndrome," the #1 cause of fish death.

• New tank stabilization system for marine and freshwater
• Rapidly and safely establishes bio-filter
• Prevents fish death from "new tank syndrome"

Unlike competing products, the bacteria employed by Stability are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability is completely harmless to all aquatic organisms (including aquatic plants) so there is no danger of overuse. The result of nearly a decade of research and development, Seachem Stability represents the current state of the art in natural biological management.

Directions: Use 1 capful (5 mL) for each 40 L (10 gallons) on the first day with a new aquarium. After that use 1 capful for each 80 L (20 gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days. For optimum bio-filter performance use 1 capful for each 40 L (10 gallons) once a month or with each water change, whenever introducing new fish, or whenever medicating an aquarium.

Tip: Use along with Seachem Prime when setting up a new tank to create an ideal safe environment for your fish.

Seachem Stability quickly stabilizes new aquarium environments and establishes the bio-filter for rapid, safe startup. Its unique blend of aerobic, anaerobic and facultative bacteria break down organic waste and toxic ammonia, nitrate and nitrite to prevent "new tank syndrome," the #1 cause of fish death.

• New tank stabilization system for marine and freshwater
• Rapidly and safely establishes bio-filter
• Prevents fish death from "new tank syndrome"

Unlike competing products, the bacteria employed by Stability are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability is completely harmless to all aquatic organisms (including aquatic plants) so there is no danger of overuse. The result of nearly a decade of research and development, Seachem Stability represents the current state of the art in natural biological management.

Directions: Use 1 capful (5 mL) for each 40 L (10 gallons) on the first day with a new aquarium. After that use 1 capful for each 80 L (20 gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days. For optimum bio-filter performance use 1 capful for each 40 L (10 gallons) once a month or with each water change, whenever introducing new fish, or whenever medicating an aquarium.

Tip: Use along with Seachem Prime when setting up a new tank to create an ideal safe environment for your fish.

Seachem Stability quickly stabilizes new aquarium environments and establishes the bio-filter for rapid, safe startup. Its unique blend of aerobic, anaerobic and facultative bacteria break down organic waste and toxic ammonia, nitrate and nitrite to prevent "new tank syndrome," the #1 cause of fish death.

• New tank stabilization system for marine and freshwater
• Rapidly and safely establishes bio-filter
• Prevents fish death from "new tank syndrome"

Unlike competing products, the bacteria employed by Stability are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability is completely harmless to all aquatic organisms (including aquatic plants) so there is no danger of overuse. The result of nearly a decade of research and development, Seachem Stability represents the current state of the art in natural biological management.

Directions: Use 1 capful (5 mL) for each 40 L (10 gallons) on the first day with a new aquarium. After that use 1 capful for each 80 L (20 gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days. For optimum bio-filter performance use 1 capful for each 40 L (10 gallons) once a month or with each water change, whenever introducing new fish, or whenever medicating an aquarium.

Tip: Use along with Seachem Prime when setting up a new tank to create an ideal safe environment for your fish.

Seachem Stability quickly stabilizes new aquarium environments and establishes the bio-filter for rapid, safe startup. Its unique blend of aerobic, anaerobic and facultative bacteria break down organic waste and toxic ammonia, nitrate and nitrite to prevent "new tank syndrome," the #1 cause of fish death.

• New tank stabilization system for marine and freshwater
• Rapidly and safely establishes bio-filter
• Prevents fish death from "new tank syndrome"

Unlike competing products, the bacteria employed by Stability are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability is completely harmless to all aquatic organisms (including aquatic plants) so there is no danger of overuse. The result of nearly a decade of research and development, Seachem Stability represents the current state of the art in natural biological management.

Directions: Use 1 capful (5 mL) for each 40 L (10 gallons) on the first day with a new aquarium. After that use 1 capful for each 80 L (20 gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days. For optimum bio-filter performance use 1 capful for each 40 L (10 gallons) once a month or with each water change, whenever introducing new fish, or whenever medicating an aquarium.

Tip: Use along with Seachem Prime when setting up a new tank to create an ideal safe environment for your fish.

SeaChem De-Nitrate removes nitrates, nitrites, ammonia, and organics from both freshwater and marine aquariums. The high porosity of De-Nitrate supports the proliferation of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts.

• Removes nitrates, nitrites, ammonia and organics
• Supports growth of beneficial bacteria that eliminate toxins
• Suitable for fresh and saltwater tanks

Even when exhausted as an organic adsorbent, SeaChem De-Nitrate continues to be an excellent support for the biological filter and does not have to be removed.

Directions: Place De-Nitrate to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once De-Nitrate has been used for several days, nitrate concentrations should start to fall and level off gradually at a concentration of 4-5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of De-Nitrate treats about 100-200 L (25-50 gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.

SeaChem De-Nitrate removes nitrates, nitrites, ammonia, and organics from both freshwater and marine aquariums. The high porosity of De-Nitrate supports the proliferation of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts.

• Removes nitrates, nitrites, ammonia and organics
• Supports growth of beneficial bacteria that eliminate toxins
• Suitable for fresh and saltwater tanks

Even when exhausted as an organic adsorbent, SeaChem De-Nitrate continues to be an excellent support for the biological filter and does not have to be removed.

Directions: Place De-Nitrate to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once De-Nitrate has been used for several days, nitrate concentrations should start to fall and level off gradually at a concentration of 4-5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of De-Nitrate treats about 100-200 L (25-50 gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.

SeaChem De-Nitrate removes nitrates, nitrites, ammonia, and organics from both freshwater and marine aquariums. The high porosity of De-Nitrate supports the proliferation of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts.

• Removes nitrates, nitrites, ammonia and organics
• Supports growth of beneficial bacteria that eliminate toxins
• Suitable for fresh and saltwater tanks

Even when exhausted as an organic adsorbent, SeaChem De-Nitrate continues to be an excellent support for the biological filter and does not have to be removed.

Directions: Place De-Nitrate to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once De-Nitrate has been used for several days, nitrate concentrations should start to fall and level off gradually at a concentration of 4-5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of De-Nitrate treats about 100-200 L (25-50 gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.

Seachem Garlic Guard is an appetite and flavor enhancer for freshwater and saltwater fish. Garlic Guard contains allicin (the naturally derived, active ingredient found in garlic), which has been demonstrated to possess health-promoting benefits, and will help renew the interest of poor or finicky eaters.

• Garlic additive and flavor enhancer
• Renews interest of poor or finicky eaters
• Suitable for fresh or saltwater; reef and plant safe

Allicin possesses strong antioxidant properties (similar to Vitamin C) which promote enhanced health through elimination of free radicals. For enhanced health benefits, Seachem Garlic Guard also contains Vitamin C. Safe for freshwater, marine and reef aquariums.

Directions for Use: Shake well before use. Soak food in Garlic Guard before feeding.

Guaranteed Analysis:
Garlic Extract - 9900 ppm
Allicin (active ingredient) - 130 ppm
Vitamin C - 1000 ppm

Seachem Purigen Ultimate Filtration is a premium synthetic adsorbent that, unlike any other filtration product, is not a mixture of ion exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from water at a rate and capacity that exceeds all others by over 500%.

• Removes soluble and insoluble impurities from water
• Controls ammonia, nitrites, nitrates
• Polishes water to unparalleled clarity

Purigen controls ammonia, nitrites and nitrates by removing nitrogenous organic waste that would otherwise release these harmful compounds. Purigens impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Purigen darkens progressively as it exhausts, and is easily renewed by treating with bleach. Purigen is designed for both marine and freshwater use.

Why Its Different:

• Selectivity: Purigen is the highest capacity organic filtration resin on the market. No other products can compare to its ability to clear haziness and polish water to unparalleled clarity. Unlike other products on the market which are simple ion-exchange resins, Purigen is specifically designed to be an organic scavenging resin. When ion-exchange resins are filled to capacity by metals and other contaminants, Purigen has barely begun to reach its potential. Purigen generally ignores simple elemental compounds, having an extreme affinity for nitrogenous organics. The primary source of nitrogenous compounds in an aquarium is waste. Fish, corals, even plants produce nitrogenous waste. Purigen removes that waste faster and more completely than anything else on the market.
• Capacity: Purigens possesses enhanced capacity owing to its vast surface area. All other resins on the market are purely spherical extruded beads. These beads remain smooth even under a microscope. Purigen is both spherical and macroreticular. It has microscopic pores that increase its usable surface area to many times that of a purely spherical resin.
• Regeneration: Purigen can also be regenerated. As it adsorbs waste products, Purigen will change color from a pale blonde to a dark brown, almost black. Once it is exhausted, it can be regenerated with a solution of bleach and water. The bleach will literally “burn off" the organics that have been removed from the tank. Watch out for products that claim to be regenerable with a brine solution. That is the regeneration procedure for ion-exchange purposes. A brine solution will not remove organics. While such resins have a limited capacity for organic adsorption, a brine regeneration process only replaces removed ionic compounds. It does not destroy large organic molecules that were removed, which is the primary function of organic adsorption resins.

Directions:
Rinse before use. Use in a fine mesh filter bag. Each 1 L treats up to 4,000 L (1,000 gallons) for up to six months. Exhaustion is indicated by a pronounced discoloration of the beads to dark brown or black.

Regeneration: Soak in a 1:1 bleach:water solution for 24 hours in a non-metalic container in a well ventilated area and away from children. Rinse well, then soak for 8 hours with a solution containing 2 tablespoons of ChlorGuard, Prime, or equivalent dechlorinator per cup of water. Rinse well. Original color and full activity should now be restored and Purigen is ready for reuse. Caution: some slime coat products may permanently foul Purigen and render regeneration difficult. Do not reuse if odor of chlorine is detectable. In case of doubt, soak beads in small quantity of water and test for residual chlorine with a chlorine test kit.

Dosage:
100 ml (Media Bag): Treats 106 Gallons
250 ml: Treats 265 Gallons
500 ml: Treats 530 Gallons
1 Liter: Treats 1,060 Gallons
2 Liters: Treats 2,120 Gallons

Seachem Purigen Ultimate Filtration is a premium synthetic adsorbent that, unlike any other filtration product, is not a mixture of ion exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from water at a rate and capacity that exceeds all others by over 500%.

• Removes soluble and insoluble impurities from water
• Controls ammonia, nitrites, nitrates
• Polishes water to unparalleled clarity

Purigen controls ammonia, nitrites and nitrates by removing nitrogenous organic waste that would otherwise release these harmful compounds. Purigens impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Purigen darkens progressively as it exhausts, and is easily renewed by treating with bleach. Purigen is designed for both marine and freshwater use.

Why Its Different:

• Selectivity: Purigen is the highest capacity organic filtration resin on the market. No other products can compare to its ability to clear haziness and polish water to unparalleled clarity. Unlike other products on the market which are simple ion-exchange resins, Purigen is specifically designed to be an organic scavenging resin. When ion-exchange resins are filled to capacity by metals and other contaminants, Purigen has barely begun to reach its potential. Purigen generally ignores simple elemental compounds, having an extreme affinity for nitrogenous organics. The primary source of nitrogenous compounds in an aquarium is waste. Fish, corals, even plants produce nitrogenous waste. Purigen removes that waste faster and more completely than anything else on the market.
• Capacity: Purigens possesses enhanced capacity owing to its vast surface area. All other resins on the market are purely spherical extruded beads. These beads remain smooth even under a microscope. Purigen is both spherical and macroreticular. It has microscopic pores that increase its usable surface area to many times that of a purely spherical resin.
• Regeneration: Purigen can also be regenerated. As it adsorbs waste products, Purigen will change color from a pale blonde to a dark brown, almost black. Once it is exhausted, it can be regenerated with a solution of bleach and water. The bleach will literally “burn off" the organics that have been removed from the tank. Watch out for products that claim to be regenerable with a brine solution. That is the regeneration procedure for ion-exchange purposes. A brine solution will not remove organics. While such resins have a limited capacity for organic adsorption, a brine regeneration process only replaces removed ionic compounds. It does not destroy large organic molecules that were removed, which is the primary function of organic adsorption resins.

Directions:
Rinse before use. Use in a fine mesh filter bag. Each 1 L treats up to 4,000 L (1,000 gallons) for up to six months. Exhaustion is indicated by a pronounced discoloration of the beads to dark brown or black.

Regeneration: Soak in a 1:1 bleach:water solution for 24 hours in a non-metalic container in a well ventilated area and away from children. Rinse well, then soak for 8 hours with a solution containing 2 tablespoons of ChlorGuard, Prime, or equivalent dechlorinator per cup of water. Rinse well. Original color and full activity should now be restored and Purigen is ready for reuse. Caution: some slime coat products may permanently foul Purigen and render regeneration difficult. Do not reuse if odor of chlorine is detectable. In case of doubt, soak beads in small quantity of water and test for residual chlorine with a chlorine test kit.

Dosage:
100 ml (Media Bag): Treats 106 Gallons
250 ml: Treats 265 Gallons
500 ml: Treats 530 Gallons
1 Liter: Treats 1,060 Gallons
2 Liters: Treats 2,120 Gallons

Seachem Purigen Ultimate Filtration is a premium synthetic adsorbent that, unlike any other filtration product, is not a mixture of ion exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from water at a rate and capacity that exceeds all others by over 500%.

• Removes soluble and insoluble impurities from water
• Controls ammonia, nitrites, nitrates
• Polishes water to unparalleled clarity

Purigen controls ammonia, nitrites and nitrates by removing nitrogenous organic waste that would otherwise release these harmful compounds. Purigens impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Purigen darkens progressively as it exhausts, and is easily renewed by treating with bleach. Purigen is designed for both marine and freshwater use.

Why Its Different:

• Selectivity: Purigen is the highest capacity organic filtration resin on the market. No other products can compare to its ability to clear haziness and polish water to unparalleled clarity. Unlike other products on the market which are simple ion-exchange resins, Purigen is specifically designed to be an organic scavenging resin. When ion-exchange resins are filled to capacity by metals and other contaminants, Purigen has barely begun to reach its potential. Purigen generally ignores simple elemental compounds, having an extreme affinity for nitrogenous organics. The primary source of nitrogenous compounds in an aquarium is waste. Fish, corals, even plants produce nitrogenous waste. Purigen removes that waste faster and more completely than anything else on the market.
• Capacity: Purigens possesses enhanced capacity owing to its vast surface area. All other resins on the market are purely spherical extruded beads. These beads remain smooth even under a microscope. Purigen is both spherical and macroreticular. It has microscopic pores that increase its usable surface area to many times that of a purely spherical resin.
• Regeneration: Purigen can also be regenerated. As it adsorbs waste products, Purigen will change color from a pale blonde to a dark brown, almost black. Once it is exhausted, it can be regenerated with a solution of bleach and water. The bleach will literally “burn off" the organics that have been removed from the tank. Watch out for products that claim to be regenerable with a brine solution. That is the regeneration procedure for ion-exchange purposes. A brine solution will not remove organics. While such resins have a limited capacity for organic adsorption, a brine regeneration process only replaces removed ionic compounds. It does not destroy large organic molecules that were removed, which is the primary function of organic adsorption resins.

Directions:
Rinse before use. Use in a fine mesh filter bag. Each 1 L treats up to 4,000 L (1,000 gallons) for up to six months. Exhaustion is indicated by a pronounced discoloration of the beads to dark brown or black.

Regeneration: Soak in a 1:1 bleach:water solution for 24 hours in a non-metalic container in a well ventilated area and away from children. Rinse well, then soak for 8 hours with a solution containing 2 tablespoons of ChlorGuard, Prime, or equivalent dechlorinator per cup of water. Rinse well. Original color and full activity should now be restored and Purigen is ready for reuse. Caution: some slime coat products may permanently foul Purigen and render regeneration difficult. Do not reuse if odor of chlorine is detectable. In case of doubt, soak beads in small quantity of water and test for residual chlorine with a chlorine test kit.

Dosage:
100 ml (Media Bag): Treats 106 Gallons
250 ml: Treats 265 Gallons
500 ml: Treats 530 Gallons
1 Liter: Treats 1,060 Gallons
2 Liters: Treats 2,120 Gallons

Seachem Garlic Guard is an appetite and flavor enhancer for freshwater and saltwater fish. Garlic Guard contains allicin (the naturally derived, active ingredient found in garlic), which has been demonstrated to possess health-promoting benefits, and will help renew the interest of poor or finicky eaters.

• Garlic additive and flavor enhancer
• Renews interest of poor or finicky eaters
• Suitable for fresh or saltwater; reef and plant safe

Allicin possesses strong antioxidant properties (similar to Vitamin C) which promote enhanced health through elimination of free radicals. For enhanced health benefits, Seachem Garlic Guard also contains Vitamin C. Safe for freshwater, marine and reef aquariums.

Directions for Use: Shake well before use. Soak food in Garlic Guard before feeding.

Guaranteed Analysis:
Garlic Extract - 9900 ppm
Allicin (active ingredient) - 130 ppm
Vitamin C - 1000 ppm

SeaChem PhosGuard rapidly removes phosphate and silicate from marine and freshwater aquaria. It is not recommended for phosphate buffered freshwater. SeaChem PhosGuard is highly porous for high capacity and bead-shaped for optimum water flow.

• Removes phosphate and silicate from fresh and saltwater systems
• Highly porous and bean-shaped for maximum absorption and water flow
• Causes a decline in hair algae and enhanced coral growth

SeaChem Phosguard outperforms all competing products. PhosGuard is a high capacity and high efficiency filtration product for removing phosphates and silicates from marine or fresh water aquaria. Unlike competing products, PhosGuard is bead-shaped for optimum flow characteristics and has an exceptional porosity for enhanced capacity. PhosGuard has a working capacity to remove 20 to 60 mg/l phosphate in 100 gallons with a similar impact on silicates. It may be used continuously or intermittently, and will not release removed phosphate. PhosGuard will cause a decline in hair algae and enhance coral growth. Each liter treats up to 300 gallons. Marine or freshwater use.

Instructions: Use 1 cup for every 75 gallons. Leave product in place for 4 days, then test phosphate and silicate.